Utility Shelf

All pieces are made with 1x3 lumber. Side pieces overlap with the top stiles holding the top shelf. Shelves are overlap joints with glue and brad nails, connected with corner brackets.

{{job.width}}" x {{job.height}}" x {{job.depth}}"
{{job.num_shelves}} shelves, {{job.slats_per_shelf}} slats per shelf, with gaps of {{job.slat_gap.toFixed(3)}}"

parameters

in
in
in
in
in
in

bill of materials

☐ {{out.length}}x 1x3 lumber (96")
☐ {{4 * job.num_shelves}}x corner brackets + screws
☐ {{4 * job.slats_per_shelf * job.num_shelves}}x brad nails
☐ 4x levelling feet

cut list

{{out.length}} boards of length {{job.board_length}} are needed (saw kerf: {{job.kerf}})
{{cut.name}}, {{cut.length}} {{board.remainder}}